3 customer reviews
Help for Keith
Keith I'm lead to believe the CRG 10mm kingpin is longer. therefore providing the require extra room to fit these adjusters. (See Link Here: http://kracer.com.au/king-pin-bolt-d10-x-110mm.html)
Free Hot tip.
Do not fit to to Arrow X1
Don't try and fit these to an Arrow X1-28, original king pins are not long enough. Any other brand of king pins have play between pin and bearing. Arrow king pin is a machined 10mm dia x 80mm socket shoulder screw which you can't buy any longer than 80mm. Keith Butler
Sniper Caster/Camber Adjusters For Tony Kart V2 Racer.
Just fitted these to my Tony Kart V2 Racer. No need to drill the top of the chassis as the holes are already 22mm. The 4mm mounting holes come close to the edge of the C section but are ok. I have made up some spacers to fit up inside the adjuster to the base of the domed washer, this is to centre the stub axle in the C section. The bottom original caster centre has been retained and set to neutral arrows forward.
Spacer dimensions as follows:-
Top product NO compromising caster camber adjustment.