Nuts and Bolts

Name
Set Descending Direction

Grid List

20 per page

20 Item(s)

  1. Kart Bolt Kit - Kartech Kart Bolt Kit - Kartech

    Kart Bolt Kit - Kartech

    $82.00
    Bolt Box with 18 compartments with an array of nuts, bolts and washers to help you out at the track. If purchased individually the Bolt-Box kit would retail for well over $165.00. Bolt Box contains the following; 1 x Plastic Box/Storage For Bolt Kit(18 Compartments) 10 x Capscrew 6 X 20mm 10 x Capscrew 6 X 30mm 10 x Capscrew Counter Sunk 6 X 20mm 10 x Capscrew Counter Sunk 6 X 25mm 2 x Capscrew Counter Sunk 8 X 40mm 2 x Capscrew Counter Sunk 8 X 50mm 2 x Capscrew Counter Sunk 8 X 60mm 20 x Nut Nyloc Flanged 6mm 20 x Nut Nyloc Flanged 8mm 20 x Washer 6mm 20 x Washer 8mm 10 x Floor Tray Spacer Clear Nylon 6mm 10 x Floor Tray Washer C/Sunk Black Plastic 6mm 2 x Stub Axle Nut Nyloc 14 X 1.5mm Pitch 6 x Seat Spacer Tapered Black Plastic 8mm - To Align Seat/Bracket 6 x Seat Washer C/Sunk Black Plastic 8mm 10 x Washer 6 X 30mm 10 x Washer 8 X 30mm 6 x Seat Spacer Black Plastic 8mm 4 x Capscrew Counter Sunk 8 X 25mm
  2. M12 nut

    M12 nut

    $1.49
    M12 nut, suitable for old style stub axles
  3. M14 nut

    M14 nut

    $1.95
    M14 nut, suitable for old style stub axles
  4. M6 Bolts - Countersunk

    M6 Bolts - Countersunk

    Starting at: $0.50

    Countersunk bolts are great for use where a smooth top is preferable to the sharp head of a normal bolt. They're just a strong as a normal cap screw, but a bit sleeker. These bolts are measured over the full length of the bolt (ie, the head of the bolt is included in the measurement). They have a 4mm hex socket.
  5. M6 Bolts - Socket Head

    M6 Bolts - Socket Head

    Starting at: $0.50

    Socket head cap screws are the default bolt of choice on most karts worldwide. They're incredibly strong and feature hex sockets for the ability to really crank 'em up tight. If you're like most karters, your torque wrench is set to "tighten till it strips, then back it off a quarter turn". Seriously, don't do that. Tight's nice. Too tight sucks. These bolts are measured from under the head of the bolt, to the end of the thread (ie, the head of the bolt is not included in the measurement). They have a 5mm hex socket.
  6. M6 Flanged Nyloc Nuts - 50 Pack

    M6 Flanged Nyloc Nuts - 50 Pack

    $12.00
    Nyloc nuts are the staple fastener of the karting world, because they resist loosening from vibration so effectively. That said, they do loose their grip when they get old, or tightened/loosened too many times, so it's worth replacing them regularly, especially because they're so cheap! These have an 6mm thread, and you tighten them with a 10mm spanner/socket. SOLD IN PACKS OF FIFTY! If you put a quantity of "1" in your shopping trolley, we'll send you fifty nuts.
  7. M6 Nyloc Nuts

    M6 Nyloc Nuts

    $0.40
    Nyloc nuts are the staple fastener of the karting world, because they resist loosening from vibration so effectively. That said, they do loose their grip when they get old, or tightened/loosened too many times, so it's worth replacing them regularly, especially because they're so cheap! These have a 6mm thread, and you tighten them with a 10mm spanner/socket.
  8. M6 Rubber Washer (Floortray)

    M6 Rubber Washer (Floortray)

    $1.50
    Isolates your floortray from chassis vibration.
  9. M8 Bolts - Countersunk

    M8 Bolts - Countersunk

    Starting at: $0.75

    These are most regularly used as seat bolts in karts, or anywhere where clearance over the head of the bolt might be an issue. (They're also slightly less likely to rattle loose due to the additional surface area of the countersunk face, though given that you're almost certainly using nyloc nuts everywhere on your kart, it probably doesn't matter... so there's a totally useless fact for you!). The length of these is measured over the entire length of the bolt, including the head. They have a 5mm hex socket.
  10. M8 Bolts - Socket Head

    M8 Bolts - Socket Head

    Starting at: $0.75

    Socket head cap screws are the default bolt of choice on most karts worldwide. They're incredibly strong and feature hex sockets for the ability to really crank 'em up tight. If you're like most karters, your torque wrench is set to "tighten till it strips, then back it off a quarter turn". Seriously, don't do that. Tight's nice. Too tight sucks. These bolts are measured from under the head of the bolt, to the end of the thread (ie, the head of the bolt is not included in the measurement). They have a 6mm hex socket.
  11. M8 Countersunk Plastic Washer - Pkt 6

    M8 Countersunk Plastic Washer - Pkt 6

    $9.00
    Plastic countersunk washer for an M8 bolt. These washers are most commonly used on seats, seat stays etc. Qty: 6 per packet
  12. M8 Flanged Nyloc Nuts - 50 Pack

    M8 Flanged Nyloc Nuts - 50 Pack

    $15.00
    Nyloc nuts are the staple fastener of the karting world, because they resist loosening from vibration so effectively. That said, they do loose their grip when they get old, or tightened/loosened too many times, so it's worth replacing them regularly, especially because they're so cheap! These have an 8mm thread, and you tighten them with a 13mm spanner/socket. SOLD IN PACKS OF FIFTY! If you put a quantity of "1" in your shopping trolley, we'll send you fifty nuts.
  13. M8 Nyloc Nuts

    M8 Nyloc Nuts

    $0.50
    Nyloc nuts are the staple fastener of the karting world, because they resist loosening from vibration so effectively. That said, they do loose their grip when they get old, or tightened/loosened too many times, so it's worth replacing them regularly, especially because they're so cheap! These have a 8mm thread, and you tighten them with a 13mm spanner/socket.
  14. Nyloc Wheel Nut

    Nyloc Wheel Nut

    $0.50
    Nyloc wheelnut with a flange. Don't lose a wheel ever again!
  15. Seat Bolt Kit - Kartech

    Seat Bolt Kit - Kartech

    $68.00
    Includes pretty much everything you'll need to mount up your seat unless you want to mount it REALLY high, in which case a couple of extra spacers may be in order :-)
  16. Seat Washers

    Seat Washers

    Starting at: $1.50

    Plastic Seat Washers 8mm hole
  17. Seat Washers (Aluminium)

    Seat Washers (Aluminium)

    Starting at: $2.95

  18. Seat Washers (Self Aligning)

    Seat Washers (Self Aligning)

    Starting at: $4.99

    Kartech's nifty self aligning seat washers help to perfectly align your mounting bolts with the seat. This allows you to mount the seat without pre-stressing it, which is critical for good handling, and also helps prevent the seat from breaking around the mounting washers.
  19. Wheel Nut

    Wheel Nut

    $3.00
    Wheel Nut 22m with 8mm Internal Hex
  20. Wheel Stud

    Wheel Stud

    $4.00
    These are the nicest studs we've ever found. With beautifully rolled threads, we're yet to see a failure. Don't forget to loctite them in when you install them.
Name
Set Descending Direction

Grid List

20 per page

20 Item(s)